Possl D-Line 2011 Instruction Manual Download

Page: 95 / 118

Motorhome - 02/11-0 - PSL-MJ11-00EN

Sanitary fittings

Empty the waste water tank. Take note of the environmental tips in this
chapter.

Empty Thetford cassette. Take note of the environmental tips in this
chapter.

Rinse the water tank thoroughly.

Let the water system dry for as long as possible.

After emptying, leave all water taps on in the central position.

Leave all drain cocks open.

11.5

Toilet compartment

Do not transport loads in the shower tray. The shower tray or other items
of equipment in the toilet compartment can otherwise be damaged.

Fig. 97

Shower handset

For ventilation purposes during or after a shower, and for drying wet
clothing, close the toilet compartment door and open the toilet compart-
ment window or skylight. This improves the air circulation.

Use the shower handset (Fig. 97,1) to shower. To do this pull out the
shower handset.

Close the shower curtain completely while showering, so that water cannot
penetrate between the washroom wall and the shower tray.

After using the shower, wipe it dry to prevent moisture from collecting.

Further information about cleaning the toilet compartment can be found in
Section 12.2.

Summary of Contents for D-Line 2011























































































































Search results

Summary of Contents for D-Line 2011

Reviews:

Related manuals for D-Line 2011

Brands by name

Popular brands

Possl D-Line 2011, Instruction Manual

Search results

Summary of Contents for D-Line 2011

Reviews:

Related manuals for D-Line 2011

Brands by name

Popular brands