Possl D-Line 2011 Instruction Manual Download

Page: 31 / 118

Motorhome - 02/11-0 - PSL-MJ11-00EN

Pitching the motorhome

6Pitching the motorhome

6.1

Handbrake

Firmly apply the handbrake when parking the vehicle.

6.2

Entrance step

In order to exit the vehicle, first fully extend the entrance step.

6.3

230 V connection

The vehicle can be connected to a 230 V power supply (see Chapter 9).

6.4

Refrigerator

6.4.1

Absorption refrigerator

12 V operation of the refrigerator is only possible when the vehicle engine is
running. If the vehicle engine is switched off, set the refrigerator to 230 V oper-
ation or gas operation.

6.4.2

Compressor refrigerator

The refrigerator only functions in 12 V operation.

An applied handbrake can prevent the driver's seat from turning. If neces-
sary release the handbrake briefly.

Summary of Contents for D-Line 2011























































































































Search results

Summary of Contents for D-Line 2011

Reviews:

Related manuals for D-Line 2011

Brands by name

Popular brands

Possl D-Line 2011, Instruction Manual

Search results

Summary of Contents for D-Line 2011

Reviews:

Related manuals for D-Line 2011

Brands by name

Popular brands