Possl D-Line 2011, Instruction Manual

Page: 63 / 118

63
Motorhome - 02/11-0 - PSL-MJ11-00EN
Gas system
8
8.3 Changing gas bottles
„
Open flap for the gas bottle compartment.
„
Close the regulator tap (Fig. 67,4) on the gas bottle. Pay attention to the
direction of the arrow.
„
Hold the gas pressure regulator (Fig. 67,2) and open the knurled nut
(Fig. 67,3) (left-handed thread).
„
Remove the gas pressure regulator and the gas tube (Fig. 67,1) from the
gas bottle.
„
Release the fixing belts and remove the gas bottle.
„
Place a filled gas bottle in the gas bottle compartment.
„
Fix gas bottle in place with the fixing belts.
„
Position the gas pressure regulator (Fig. 67,2) and the gas tube (Fig. 67,1)
on the gas bottle and tighten the knurled nut (Fig. 67,3) by hand (left-
handed thread).
„
Close flap.
8.4 Gas isolator taps
A gas isolator tap (Fig. 68) for every gas device is built into the vehicle.
The gas isolator taps are located in the vehicle at different positions, and can
also be fitted separately.
X
When changing gas bottles, do not smoke or create any open fire.
X
When you have changed the gas bottle, check whether gas escapes at
the connection points and unions. Use a leakage search spray to spray
the relevant connection point or union. These agents are available at the
accessories shop.
Fig. 67 Gas bottle connection
Fig. 68 Symbols for the gas isolator
taps
1 Cooker
2 Refrigerator
3 Heater/boiler
3 2 1