Possl D-Line 2011 Instruction Manual Download

Page: 74 / 118

Motorhome - 02/11-0 - PSL-MJ11-00EN

Electrical system

Connecting the power

cable:

Open the external flap.

Depending on the model, fold up the cover.

Plug in the plug:

9.6

Fuses

9.6.1

Main fuse

Location

The main fuse has been fitted in the B-pillar (centre pillar). It can be accessed
from the passenger side.

9.6.2

12 V fuses

The appliances connected to the 12 V power supply in the living area are fused
individually. The fuses are accessible at different positions in the vehicle.

An intact 12 V fuse can be detected by the unbroken fuse element (Fig. 75,1).
If the fuse element is broken (Fig. 75,2), change the fuse.

Depending on the model, unlock the plug before pulling it out.

Only replace defective fuses when the cause of the defect is known and
has been remedied.

Only replace defective fuses when the power supply is switched off.

Never bridge or repair fuses.

Fig. 74

Main fuse

Main fuse 50 A/red

2 x flat fuse 2 A/grey

Fig. 75

12 V fuse

Unbroken fuse element

Broken fuse element

Summary of Contents for D-Line 2011























































































































Search results

Summary of Contents for D-Line 2011

Reviews:

Related manuals for D-Line 2011

Brands by name

Popular brands

Possl D-Line 2011, Instruction Manual

Search results

Summary of Contents for D-Line 2011

Reviews:

Related manuals for D-Line 2011

Brands by name

Popular brands