Possl D-Line 2011 Instruction Manual Download

Page: 22 / 118

Motorhome - 02/11-0 - PSL-MJ11-00EN

Before the journey

4.2

Entrance step

4.2.1

Electrically operated entrance step

Operating switch

The switch to operate the entrance step is located on the inside of the vehicle
in the area of the conversion door.

Extending:

Press the rocker switch (Fig. 1,1) down until the entrance step has
extended completely.

Retracting:

Press the rocker switch (Fig. 1,1) up until the entrance step has retracted
completely.

4.3

Television

Before starting the journey and also after short breaks check whether the
entrance step has been retracted completely.

Do not stand in the direct range of movement of the entrance step while
the entrance step is being extended or retracted.

Do not step on the entrance step until it has extended completely. There
is a risk of injury!

Never raise or lower persons or loads with the entrance step.

Clean dust and dirt regularly from the entrance step, do not grease or oil
moving parts.

Fig. 1

Operating switch entrance
step

Before starting your journey, remove the television from the support and
store it securely.

Summary of Contents for D-Line 2011























































































































Search results

Summary of Contents for D-Line 2011

Reviews:

Related manuals for D-Line 2011

Brands by name

Popular brands

Possl D-Line 2011, Instruction Manual

Search results

Summary of Contents for D-Line 2011

Reviews:

Related manuals for D-Line 2011

Brands by name

Popular brands