BRX-XLR User Guide
23
180-0145-001-R01
Figure 14: Pole Mount Kit option for BRX-XLR-2
7.2.2 BRX-XLR-2 Strand Mounting Option
When using the BRX-XLR-STRAND-KIT, all you need to do is simply use the supplied nuts and bolts
to affix the strand mount bracket into the circular slots in the mounting flange at both ends of the
BRX-XLR-2 enclosure as per the diagram below. You can use any of the slots to adjust the strand
mount bracket to clear any cables or devices already present.
Span
between the strand and the BRX-XLR-2 can vary from 3-
9” (76 – 228 mm)
Strand Diameter
can range from ¼” (6.6 mm) to 3/8” (10 mm)
Bracket Material:
stamped from 5052 H34 Aluminum
Mounting Bolt:
Grade 2 steel and hot dip galvanized (as per ASTM A153)
When using the BRX-XLR-POLE-KIT, simply
insert a metallic or plastic strap into the
rectangular slot in the mounting flange at
both ends of the BRX-XLR-2 enclosure
Screws can also be used to fasten
the BRX-XLR-2 enclosure directly
into the pole. You should use #10 (6
mm) screws.
