10
2.
While steadying the terminal with your hand holding onto the base, tilt
the screen down.
3.
Push the cable cover outwards to remove it from the base.
4.
Position your terminal in
Full Extended mode
.
4.1
Support the screen with one hand holding onto its bottom edge.
Then, while pulling the lever backwards, move the display upwards
until the lever is snapped into the lower hook to raise the screen as
shown in the below figure.
4.2
Tilt the screen up or down to your
desired angle. Please do not press on
the LCD panel while setting up the tilt
angle.
4.3
Fix the base with two #/6/32-14L screws.
Lower
hook
Lever
