Installing UPS Battery to Gen 8E Base Stand
UPS battery compartment can be found
at the bottom of Gen 8E base stands as
shown in the figure. Please be advised
that the installation of UPS battery
should be conducted by a technician
according to the user manual specific to
UPS battery.
Installing Side Mount Upgrade Kits
Located at left side on the back of your
LCD panel, side mount compartment is
mainly used for installation of side-
mounted equipment, such as magnetic
stripe reader. For detailed installation
instructions, please refer to the user
manual specific to the device which you
intend to mount onto the terminal.
Installing Rear Top Mount Upgrade Kits
Rear top mount upgrade kits, including
customer pole displays and monitors, have
to be mounted onto the top side on the rear
of your POS terminal as shown in the
figure. As for the installation instructions
along with the individual cable
arrangement for the specific stand base,
please be advised to read the user manual
specific to the device you intend to install.
Installing Wall Mount Kits
The wall mount kits enable you to mount your POS terminal onto the
wall as an alternative. For detailed installation instructions, please be
advised to refer to the user manual specific to wall mount kits.
Installing an Operating System
You are highly advised not to install an operating system on XT-5415/5615
without professional instructions. Not only might the careless handling during
installation cause irreversible damage to your machine, but also the improper
installation likely leads to system malfunction or failure. Please contact with
your dealers about the issues of operating system installation.
18
