Positioning your POS for a Perfect Viewing Angle
The adjustable base stands designed for XT-5415/5615 come in two models,
Gen 7E/8E, and allow you to determine an ideal position for your terminal
using its unique tilt adjustment mechanism. As the below figures suggest, both
Gen 7E and Gen 8E base stands provide three standard positioning solutions
for your terminal: flat folded mode, low profile mode, and full extended mode.
XT-5415/5615 with Gen 8E Stand Base
Flat folded mode
Low profile mode
Full extended mode
In general, XT-5415/5615 will be set up beforehand in flat folded mode and
then packaged into the box for shipping. After it is unpacked, you may re-
adjust the terminal in either low profile mode or full extended mode according
to your situation. Below will provide instructions on how to adjust the specific
base stand connected to the POS system. As a reminder, please be careful not
to touch the LCD panel while setting up the tilt angle
XT-5415/5615 with Gen 7E Base Stand
Please refer to the following instructions on how to switch among different
positioning modes to find an ideal viewing angle for XT-5415/5615 with
Gen 7E base stand.
1.
Unpack XT-5415/5615, which is supposed to
be set in flat folded mode, out of the package
box and then lay your POS system on a flat
surface.
2.
Steady the base stand with one hand, and then
tilt the screen downwards.
5