Page 6
hazard! Never touch any metal pin in the connectors or
circuits to avoid high voltage hazard or electrostatic discharge
damage unless the operator is well grounded. Failure to do the
above will void the product warranty!
Display Issues
Main LCD Display
For best viewing result, please set your display resolution at 800 x 600 for 7”,
8” and 10” LCD, as well as for XP-2012H is 1024 x 768. The system Video
Memory is shared from system memory. XP-2000 series support DVMT
Function and the video memory size is default in 128 MB and can be set to be
64 MB.
VGA Port
The VGA port in the XP-2000 system supports either a rear mount 2
nd
display
or a separately connected LCD monitor or touch monitor. To support the DC
power to the 2
nd
display monitor, it required a qualified technician to set an
internal jumper in XP main unit. To supply the necessary power through the
VGA connector, please refer to the Posiflex technical information.
Do not
connect other monitor to this port before the power in this port is disabled.
Posiflex USB Touch Manager
A program named “Posiflex USB Touch Manager” and a right-click sticky
button tool in the program group “Posiflex USB Touch Tools” is installed in
the preloaded Windows system with a USB interface touch panel controller.
This program can also be obtained by download from the POSIFLEX web site.
Mouse Emulation
The touch panel in XP-2000 system uses internal USB
interface as standard and occupies no external port.
When the touch driver is properly installed, this touch
panel works exactly like a standard mouse for each interface. Nevertheless, if
the system is running under safe mode, the touch panel calibration may
become unsatisfactory due to disabled drivers. It is recommended to use a
standard USB mouse or keyboard in this mode.
