Page 16
Power Supply
The operating voltage range of the power adaptor should cover the local power
supply for proper operation. The power cable, the power outlet and any power
fusing arrangements must conform to local safety regulations.
Please never do any connection / disconnection when system is still powered
on. Please always keep the external power adaptor in a free air circulation.
Automatic Power on Control
The system may also turn on according to some preset conditions such as
Modem Ring Up and Alarm Clock Wake Up or LAN Wake Up.
When the XP system is turned off after a successful boot up, the preset
automatic power on functions will keep monitoring for the preset conditions
and turn on the system when the preset conditions are met.
Please note that if the XP system is improperly turned off before a complete
boot up procedure, the above preset power on control functions will be
disabled until next turning off after a complete boot up.
Storage Device
The standard system storage device is a DOM (Disk on Module) in the main
unit. This device can be replaced with an option SSD HDD or 2.5” SATA
HDD.
TECHNICAL MANEUVERS
Some technical maneuver in XP-2000 series such as serial COM port +5V
power supply settings is supported in system jumper setting. However, such
support is limited to the application of specific Posiflex peripherals and must
be disabled when the Posiflex peripherals are disconnected.
Failure to follow
the discipline would result in electric or fire hazard and such
consequences are not covered by product warranty!
The rest applicable technical maneuvers include system CMOS data reset,
system reset, DRAM upgrades and installation of optional SATA HDD.
All
these technical maneuver operations require purchase of applicable Technical
