Part 14
UPGRADE WALL MOUNT KIT
There is an upgrade wall mount kit coded as SK-200 that supports an
omni-directional Laser bar code scanner as a derivation from the basic wall
mount bracket WB-6000VB. With this kit, the Laser scanner is installed under
the KS system. Please follow the instructions that come with this kit to install
and to utilize it.
OPERATING SYSTEM RECOVERY
For KS systems with operating system in the CF card if the system is
installed with the CF card reader, once the CF card is damaged, a
bootable
new CF card will be required to have the workstation back to work
. Please
follow instructions given by the System Integrator to deal with such situations.
For KS systems preloaded with Windows XP Pro / WEPOS / POS Ready
on HDD, Posiflex provides recovery DVD delivered with the touch terminal
for the preloaded operating system. The System Integrator shall take care of
software restoration after OS recovered. A Posiflex supplied USB interface
COMBO drive will be required for such action. Other brand CDROM drive
may require its own driver different from what supported in the recovery DVD.
Please use the recovery DVD in rescue operation only. Using it
otherwise may wipe out whatever stored in the HDD!
All upgrade devices
drivers needed for manual installation in usual way are available in the
subfolder “\drivers” in OS recovered HDD and the latest versions of these
required drivers will be available on our web: http://www.posiflex.com.tw.
Then follow instructions from your system integrator for software recovery.
OPERATING SYSTEM INSTALLATION
This product is a highly professionalized equipment. The installation
of an OS into a machine without any preloaded OS could be a major difficulty
for average user or obstacle by possibly unintentional negligence even for PC
veterans to accomplish such a task. Therefore, OS installation into a system
without preloaded OS is highly discouraged. Posiflex Technologies, Inc. shall
not be responsible for any technical support to questions on this aspect.
15” 2
nd
LCD Panel
A bracket kit including a steel interface bracket
will be provided with the 15” 2
nd
LCD panel LM-6501.
Please follow the accompanying installation guide to mount
the interface bracket and fix it to the rear connect area of the
system as in the right picture. Route the VGA cable through
the cable exit of the base stand to the main unit. Fit the VGA cable into the
base mount device cable groove under bottom plate of Gen 5 base. Connect the
attached power adaptor for its power source.
