Portwell WADE-8210-H110, User Manual

Page: 31 / 116

WADE-8210-H110
Copyright © Portwell 2017 WADE-8210-H110 User's Guide 31
5.2 GPIO Signal
#define DIO_Port10xFDAE04E8 // DIO1 port address
#define DIO_Port20xFDAE04F0 // DIO2 port address
#define DIO_Port30xFDAE04F8 // DIO3 port address
#define DIO_Port40xFDAE0500 // DIO4 port address
#define DIO_Port50xFDAE0548 // DIO5 port address
#define DIO_Port60xFDAE0550 // DIO6 port address
#define DIO_Port70xFDAE0558 // DIO7 port address
#define DIO_Port80xFDAE0560 // DIO8 port address
/* IpcDIOOutputControl Funtion
// User can setting DIO is output mode. The output mode must be setting pull high or low.
// MmioOffset – User setting DIO output mdoe
// High_Low - User setting DIO pull High or low
*/
void IpcDIOOutputControl( UINT32 MmioOffset, BOOLEAN High_Low)
{
UINT32 Data = 0;
//Output Mode,BIT9 Set 1 & BIT8 Set 0
Data = (MmioOffset | (0x00000200)) & ~( 0x00000100);
switch (High_Low)
{