Portwell WADE-8210-H110, User Manual

Page: 15 / 116

WADE-8210-H110
Copyright © Portwell 2017 WADE-8210-H110 User's Guide 15
4.2 Jumpers Settings
For users to customize WADE-8210-H110‘s features. In the following sections, Short means covering a jumper cap over jumper pins; Open or N/C (Not
Connected) means removing a jumper cap from jumper pins. Users can refer to Figure 1 for the Jumper allocations.
Jumper Table
The jumper settings are schematically depicted in this manual as follows:
Jump Function List:
Jump Function Remark
6 CLR CMOS CMOS Clear Button
17 SATA DOM SATA DOM Header
18 LCD PWR LVDS Power Select Jumper
19 VCON LVDS Power & Inverter Jumper
6: CMOS Clear Button
Press the button to clear CMOS(Before clearing the CMOS, make sure to turn off the system).
17: SATA DOM
PIN No. Signal Description
1-2 Short VCC
2-3 Short Ground
★