Portwell WADE-8210-H110, User Manual

Page: 105 / 116

WADE-8210-H110
Copyright © Portwell 2017 WADE-8210-H110 User's Guide 105
Serial ATA Hard Disk Setting
Unlike IDE bus, each Serial ATA channel can only connect to one SATA hard disk at a time; there are total four connectors, SATA1~2 port. The installation of
Serial ATA is simpler and easier than IDE, because SATA hard disk doesn‘t require setting up Master and Slave, which can reduce mistake of hardware
installation. All you need to operate AHCI application for system please follow up setting guide in BIOS setup utility.
WADE-8210-H110 can support four SATA interface (SATAIII, 6.0Gb/s) on board. It has two SATA ports (SATA 1 and SATA 2) on board; The SATA interface shall
support both 1.5 / 3.0Gb / 6.0Gb operation per the SATA specification.