Portwell WADE-8156, User Manual

Page: 45 / 55

WADE-8156 User’s Manual
45 / 55
4.1.4.1.2 Quiet Boot
Set this value to allow the boot up screen options to be modified between POST messages
or OEM logo. The Optimal and Fail-Safe default setting is Enabled.
4.1.4.1.3 AddOn ROM Display Mode
Set this option to display add-on ROM (read-only memory) messages.
Item Description
Force BIOS
Set this value to allow the computer system to force a third party BIOS to display during
system boot. This is the default setting.
Keep Current
Set this value to allow the computer system to display the information during system
boot.
4.1.4.1.4 Bootup Num-Lock
Set this value to allow the Number Lock setting to be modified during boot up.
4.1.4.1.5 PS/2 Mouse Support
This item allows to set PS/2 Mouse Support function.
4.1.4.1.6 Wait For ‘F1’ If Error
Set this value to allow the Wait for ‘F1’ Error setting to be modified.
Item Description
This prevents the to wait on a
Disabled
n error for user intervention. This setting should be used if
there is a known reason for a BIOS error to appear. An example would be a system
administrator must remote boot the system. The computer system does not have a
keyboard currently attached. If this setting is set, the system will continue to boot up in
to the operating system. If ‘F1’ is enabled, the system will wait until the BIOS setup is
entered.
Enabled
Set this value to allow the system BIOS to wait for any error. If an error is detected,
pressing <F1> will enter Setup and the BIOS setting can be adjusted to fix the problem.
This normally happens when upgrading the hardware and not setting the BIOS to
recognize it. This is the default setting.
4.1.4.1.7 Hit ‘DEL’ Message Display
Set this value to allow the Hit “DEL” to enter Setup Message Display to be modified.
4.1.4.1.8 Interrupt 19 Capture
Enabled: Allows option ROMs to trap interrupt 19. This is required by some PCI cards that
provide a ROM based setup utility.