Portwell WADE-8156, User Manual

Page: 23 / 55

WADE-8156 User’s Manual
23 / 55
WA rd provide -pin Dual
DDRAM (Synchronized DRAM) as on-board main memory
256 MB ~ 4 GB with using 256MB/512MB/1GB/2GB technology up to 2 double
sided DIMMs at DDR2 800 MHz. The memory arch interface to
support for x8 and x16 DDRAM(DDR2) device width. rts Non-ECC
memory.
For system compatibility and st bility, don’t use memory module without brand. You can
n
in dule on DIMM
Without out the contact and lock integrity of me n
the system reliability. Follow normal procedure t RAM module into memory
socket. Before locking, make sure that the module has been fully inserted into the DIMM
slot.
3.3 Main Memory
DE-815 Ms (240 In-line Memory Module) to support 1.5V
. The maximum memory size is
. Supports
itecture adopts 128-bit data
In addition, it only suppo
6 boa 2 DIM
a
also use the single or double-side DIMM .Th
stall different size of DDRAM mo
e three DIMMs can be out of order. You ca
1, DIMM2 or all to boot up system.
mory module with socket, it will impact o
o install your DD
OTE: For maintaining system stability, do not change any of DDR2 memory parameters in
BIOS setup to upgrade your system performance without acquiring technical
N
information.