Portwell WADE-8156, User Manual

Page: 33 / 55

WADE-8156 User’s Manual
33 / 55
4.1.2.3.1 Serial Port1/2 Address
This option specifies the base I/O port address and Interrupt Request address of serial port
1/2. The Optimal setting is 3F8/IRQ4. The Fail-Safe default setting is Disabled.
Item Description
Disabled
Set this value to prevent the serial port from accessing any system resources. When
this option is set to Disabled , the serial port physically becomes unavailable.
3F8/IRQ4
Set this value to allow the serial port to use 3F8 as its I/O port address and IRQ 4 for the
interrupt address. This is the default setting. The majority of serial port 1 or COM1 ports
on computer systems use IRQ4 and I/O Port 3F8 as the standard setting. The most
common serial device connected to this port is a mouse. If the system will not use a
serial device, it is best to set this port to Disabled .
2F8/IRQ3
Set this value to allow the serial port to use 2F8 as its I/O port address and IRQ 3 for the
interrupt address. If the system will not use a serial device, it is best to set this port to
Disabled .
3E8/IRQ4
Set this value to allow the serial port to use 3E8 as its I/O port address and IRQ 4 for the
interrupt address. If the system will not use a serial device, it is best to set this port to
Disabled .
2E8/IRQ3
Set this value to allow the serial port to use 2E8 as its I/O port address and IRQ 3 for the
interrupt address. If the system will not use a serial device, it is best to set this port to
Disabled .
4.1.2.3.2 Restore on AC Power Loss by IO
This item allows you to select if you want to power on the system after power failure.
ption: [Power On], [Power Off], [Last state].
4.1.2.3.3 Watch Dog Timer Select
Enable to set Watch Dog Timer.
The options: 10, 20, 30, 40 Sec., 1, 2, 4 Min.
O