Portwell WADE-8156, User Manual

Page: 24 / 55

WADE-8156 User’s Manual
24 / 55
-ITX
ach cables to existing peripheral devices and secure it
anism.
Marvell Gigabit Ethernet 10/100/1000BASE-TX controller by PCI Express.
The WA
interface status.
Yellow LED
Blinking
On :
Off : link is invalid
Green LED
On :
On :
3.4.2 D
WADE-8156 board provide on CD-Title to support on-board VGA and Ethernet device
drivers in various operating systems. Before installing the device drivers, please see the
reference files in each sub-directory. You cannot install drivers from CD-Title directly.
Intel Q965 Chipset Integrated Graphics supports Win2000, XP, Win2003 and 64 bit
Windows environment.
Intel Q965 & ICH8(R) Chipset Driver supports Win2000, XP, Win2003 and 64 bit
Windows environment.
Dual Marvell Gigabit Ethernet Controllers support Win2000, XP, Win2003, and 64 bit
Windows environment.
3.4 Installing the Mini
To install your WADE-8156 board into standard chassis or proprietary environment, you
need to perform the following steps:
1. Check all jumpers setting on proper position
2. Install and configure CPU and memory module on right position
3. Place WADE-8156 board into the dedicated position in your system
4. Att
NOTE: Please refer section 3.4 to install display and Ethernet drivers and setup your
system.
WARNING: Please ensure that your SBC properly inserted and fixed by mech
Otherwise, the system might be unstable or do not work from bad contact
of golden finger.
3.4.1 Dual Marvell Gigabit Ethernet Controllers
Dual
DE-8156 board provide two LED indicators on RJ-45 connectors to show LAN
These messages will give you a guide for troubleshooting.
indicates transmit and receive activity.
: indicates transmit/receive activity
indicates no activity but link is valid
indicates Link speed
link speed at 1000Mbps
link speed at 100Mbps
Off : link speed at 10Mbps
rivers Support