Portwell WADE-8156, User Manual

Page: 19 / 55

WADE-8156 User’s Manual
19 / 55
rnal Speaker Connector (SPK1) 1/2 & USB 1/2/3/4 Connectors 2.3.13 Inte 2.3.14 LAN
(USB2LAN1, USB2LAN2)
PIN No. Description
1 SPK Active#
2 SPK Active#
3 Key
4 +5V
LAN 1/2
PIN No. Description PIN No. Description
1 MDI0+ 5 MDI2+
2 MDI0- 6 MDI2-
3 MDI1+ 7 MDI3+
4 MDI1- 8 MDI3-
USB 1/2/3/4
PIN No. Description PIN No. Description
1 +5 V (fused) 5 +5 V (fused)
2 USBP0-/3- 6 USBP1-/2-
3 USBP0+/3+ 7 USBP1+/2+
4 Ground 8 Ground
2.3.15 Internal USB 5/6/7/8 Connectors (USB1, U B S 2)
PIN No. Description
1 5VSB
2 5VSB
3 DATA_6 A_8- - / DAT
4 DATA_7 A_9- - / DAT
5 /
6 D ATA_7+ /
7 Ground
8 Ground
9 Key
10 NC
Note :
rd provides 4 USB headers on the board
ing for 4 additional USB ports. To make use of
2)
, you will need to install the USB 2.0 driver
2.3.16 VGA Connector (VGA1)
1) This mainboa
allow
these headers, you must attach a USB bracket/cable
with USB ports (some models will come packaged with
a USB 4-port bracket-cable). The optionally packaged
bracket will have two connectors that you can connect
to the headers (USB1, USB2). The other end (bracket
containing the USB ports) is attached to the computer
casing.
If you are using a USB 2.0 device with Windows
2000/XP
from the Microsoft® website. If you are using Service
pack 1 (or later) for Windows® XP, and using Service
pack4 (or later) for Windows® 2000, you will not have
to install the driver.
Description PIN No. PIN No. Description
Green Signal 2 1 Red Signal
NC 4 3 Blue Signal
Ground 6 5 Ground
Ground 8 7 Ground
Ground 10 9 +5V
DCC_DATA 12 11 NC
VSYNC 14 13 HSYNC
15 DCC_CLK