Troubleshooting
ROBO-8112VG2AR User’s Manual
5-4
5.3 FAQ
Installation Problem
Question
: How to update the BIOS file of the ROBO-8112VG2AR?
Answer:
Please visit web site of the Portwell download center as below hyperlink and registeran
account.
http://www.portwell.com.tw/support/
Input your User name and password
to log in the download center. Select the "Search download" to input the keyword
"ROBO-8112VG2AR". Find the "BIOS" page to download the ROM file and flash utility.
Execute the zip file to root of the bootable USB Pen drive.
Insert your bootable USB Pen drive in ROBO-8112VG2AR board and power-on.
Input the "FPT /f XXXXX.ROM /BIOS" to start to update BIOS. (“XXXXX” is the file
name of the ROM file.)
Switch "Off" the Power Supply when you finished the update process.
To short the JP1 2-3 jumper for 5 seconds then set back to normal. (Clear
CMOS)
Switch "ON" the Power Supply then press the "del" key to BIOS to load "Restore
Defaults" then save them to exit.
Note:
Please visit our technical web site at http://www.portwell.com.tw
For additional technical information, which is not covered in this manual, you can
mail to [email protected] or to our sales for further assistance. Thank you.
