System Installation
ROBO-8112VG2AR User’s Manual
3-6
3.3
Installing the Single Board Computer
To install your ROBO-8112VG2AR into standard chassis or proprietary environment,
please perform the following:
Step 1 : Check all jumpers setting on proper position
Step 2 : Install and configure CPU and memory module at right position
Step 3 : Place ROBO-8112VG2AR into the dedicated position in the system
Step 4 : Attach cables to existing peripheral devices and secure it
WARNING
Please ensure that SBC is properly inserted and fixed by mechanism.
Note
Please refer to section 3.3.1 to 3.3.7 to install INF/VGA/LAN/Audio drivers.
3.3.1
Chipset Component Driver
ROBO-8112VG2AR uses state-of-art Intel® Panther Point chipset. It’s a new chipset that
some old operating systems might not be able to recognize. To overcome this
compatibility issue, for previous Windows Operating Systems such as Windows XP,
please install its INF before any of other Drivers are installed. You can find very easily
this chipset component driver in ROBO-8112VG2AR CD-title.
Moreover, if using some old OS, the driver may not be supported anymore. We
recommend to change the different OS to comply with this new chipset.
3.3.2
Intel® Integrated Graphics Controller
With latest Intel® Core Haswell series structure, ROBO-8112VG2AR Intel® HD
Graphic is built in with CPU. Therefore 2nd Generation Core and 3nd Generation Core
CPUs provide HD integrated Graphic support sharing on board physical memories.
ROBO-8112VG2AR has both internal VGA & DVI interface. This combination makes
ROBO-8112VG2AR an excellent piece of multimedia hardware
With no additional video adaptor, this onboard video will usually be the system
display output. By adjusting the BIOS setting to disable on-board VGA, an add-on
PCI-Express Graphic card can take over the system display.
※
To use Intel® Integrated HD Graphic, it’s required to choose the CPU which has
Integrated Graphic built-in. Otherwise there will be no display whatsoever.
