System Installation
ROBO-8112VG2AR User’s Manual
3-5
7.
Push the CPU socket lever back into its locked position.
3.2 Main
Memory
ROBO-8112VG2AR provide 2 x240 pin DIMM sockets (Dual Channel) which supports
Dual channel 1333/1600 DDR3-SDRAM as main memory, non-register function.
ROBO-8112VG2AR just supports ECC and Non-ECC memory. The maximum memory
can be up to 16GB. Memory clock and related settings can be detected by BIOS via SPD
interface.
For system compatibility and stability, do not use memory module without brand.
Memory configuration can be set to either one double-sided DIMM in one DIMM
socket or two single-sided DIMM in both sockets.
Beware of the connection and lock integrity from memory module to socket. Inserting
improperly it will affect the system reliability.
Before locking, make sure that all modules have been fully inserted into the card slots
Note:
To insure the system stability, please do not change any of DRAM parameters in BIOS
setup to modify system the performance without acquired technical information.
