BIOS Setup information
ROBO-8112VG2AR User’s Manual
2-1
Chapter 2
Hardware Configuration
This chapter gives the definitions and shows the positions of jumpers, headers and
connectors. All of the configuration jumpers on ROBO-8112VG2AR series are in the
proper position. The default settings shipped from factory are marked with an asterisk
(
Ì
).
2.1 Jumper
Setting
In general, jumpers on the single board computer are used to select options for certain
features. Some of the jumpers are designed to be user-configurable, allowing for
system enhancement. The others are for testing purpose only and should not be
altered. To select any option, cover the jumper cap over (SHORT) or remove (NC) it
from the jumper pins according to the following instructions. Here NC stands for “Not
Connect”.
