Portwell ROBO-678, User Manual

Page: 30 / 80

Operation of Ethernet Port Intel
82801BA
MAC
Intel
82559
Name of LED
ON Off
D16 D20 LAN Link Integrity LED Good link in 10 or 100 Mbps Bad link
D17 D22 LAN active LED Active No active
D18 D23 LAN speed LED 100 Mbps 10 Mbps
3
33
3----4444----4 On
4 On 4 On
4 On----board 68
board 68 board 68
board 68----pin PCI connector
pin PCI connector pin PCI connector
pin PCI connector
ROBO-678 provides one on-board 68-pin PCI connector that allows you to apply
additional PCI devices, such as SCSI or Ethernet. If you have a compatible PCI
device, simply plug it onto the connector and secure it with two retention bars.
3 33 3----5 Clear CMOS Operation 5 Clear CMOS Operation 5 Clear CMOS Operation 5 Clear CMOS Operation
The following table indicates how to enable/disable CMOS Clear Function
hardware circuit by putting jumpers at proper position.
JP1 FUNCTION
1-2 Normal Operation
2-3 Clear CMOS Contents
To correct operate CMOS Clear function, users may turn off the system, move
JP1 jumper to 2-3 position (this will not consume any power). To clear CMOS,
please turn on the power and turn it off again for AT system, or press the toggle
switch a few times for ATX system. Move the JP1 back to 1-2 position (Normal
Operation) and start the system. System will then produce a “CMOS Check Sum
Error” message and hold up. Users may then follow the displayed message to
load in BIOS default setting.