Portwell ROBO-678, User Manual

Page: 5 / 80

The manual describes how to configure your ROBO-678 system to meet
various operating requirements. It is divided into five chapters, with each
chapter addressing a basic concept and operation of Single Board Computer.
Chapter 1 : Introduction. presents what you have in the inside of box and
give you an overview of the product specifications and basic system
architecture for this model of single board computer.
Chapter 2 : Hardware Configuration Setting. shows the definitions and
locations of Jumpers and Connectors that you can easily configure your
system.
Chapter 3 : System Installation. describes how to properly mount the CPU,
main memory and M-systems flash disk to get a safe installation and give you
a programming guide of Watch Dog Timer function.
Chapter 4 : BIOS Setup Information. specifies the meaning of each setup
parameters and how to get advanced BIOS performance and update new
BIOS. In addition, POST checkpoint list will give you a guide of
trouble-shooting.
Chapter 5 : Troubleshooting. gives you a few reminding hints in building up
a valid and working system with ROBO-678, in terms of hardware and
software perspective. Issues addressed are based on the customer application
history collected throughout the years, and are presented as the most
frequently encountered problems.
The content of this manual and EC declaration document is subject to change
without prior notice. These changes will be incorporated in new editions of
the document. Portwell may make supplement or change in the products
described in this document at any time.
Updates to this manual, technical clarification, and answers to frequently
asked questions will be shown on the following web site :
http://isc.portwell.com.tw