PNA-3303 User’s Manual
6
2. Connect the power source to DOM (
Fig. 2-12, 2-13
).
Fig. 2-12
Connect power to DOM
Fig. 2-13
DOM power connection
2.7 Remove and Install Battery
1. Press the metal clip back to eject the button battery (
Fig. 2-14
).
2. Replace it with a new one by pressing the battery with fingertip to restore the battery (
Fig. 2-15
).
Fig. 2-14
Eject the battery
Fig. 2-15
Restore the battery
2.8 Remove and Install HDD
The system has an internal drive bay for two 3.5" hard disk drives. If the HDD is not pre-installed,
you can install it by yourself. Follow the steps below to install the HDD:
Before a HDD can be installed onto PNA-3303. PPAP-200 must be taken off from the chassis.
1. Connect power cable (
Fig. 2-16
) and IDE cable (
Fig. 2-17
).
Fig. 2-16
Connect power cable
Fig.
2-17
Connect IDE cable
