PNA-3303 User’s Manual
4
2.3 The
Chassis
The system is integrated in a customized 3U chassis (
Fig. 2-1, 2-2
). On the front panel you will
find a LED panel .The back panel has three LAN ports, two USB ports, one COM port and one
reserved outlet for D-SUB 9-pin or VGA connector (for V-100 VGA module)
Fig. 2-1
Front View of the Chassis
Fig. 2-2
Rear View of the Chassis
2.4 Open
the
Chassis
1. Unscrew the two screws on the bottom (
Fig. 2-3
)
2. Pull out the inner steel case harder. It is normal, if you find it a little tight (
Fig. 2-4, 2-5
)
Fig. 2-3
Unscrew the screws on the bottom
Fig. 2-4
Pull out the inner steel case (step 1)
3. The inner case then can be removed from the outer one. (
Fig. 2-6
)
Fig. 2-5
Pull out the inner steel case (step 2)
Fig. 2-6
The inner and outer steel case
