BIOS Setup Information
PEB-7431VL User’s Manual
4-13
Video off Method
This determines the manner in which the monitor is blanked.
V/H
SYNC+Blank
This selection will cause the system to turn off the vertical and
horizontal synchronization ports and write blanks to the video
buffer.
Blank Screen
This option only writes blanks to the video buffer.
DPMS Support Initial display power management signaling.
HDD Power Down
When enabled and after the set time of system inactivity, the hard disk drive will be
powered down while all other devices remain active.
The choice: Disabled, 2 Min, 3 Min, 4 Min, 5 Min, 6 Min, 7 Min, 8 Min, 9 Min, 10 Min,
11 Min, 12 Min, 13 Min, 14 Min, 15 Min.
Doze Mode
Monitor blanked when the system enters any power saving mode.
The choice: Disabled, 50MS, 100MS, 500MS, 4 Second, 8 Second, 16 Second.
Standby Mode
When enabled and after the set time of system inactivity, the fixed disk drive and the
video would be shut off while all other devices still operate at full speed.
The choice: Disabled, 2 Min, 4 Min, 6 Min, 8 Min, 12 Min, 16 Min.
Suspend Mode
When enabled and after the set time of system inactivity, all devices except the CPU
will be shut off.
The choice: Disabled, 4 Min, 8 Min, 12 Min, 16 Min, 32 Min, 48 Min, 64 Min.
DMA Request (DRQ)
When Enabled, the DMA device will be activated to APM function.
The choice: Enabled, Disabled.
PCI Master Device (PCIM)
When Enabled, the PCI master device will be activated to APM function.
The choice: Enabled, Disabled.
