NAR-7060 User’s Manual
7
2.6 Remove and Install CPU
1. Loosen and then tak off the screws on the heatsink (
Fig. 2-15
).
2. Remove the heat sink (
Fig. 2-16
).
Fig. 2-15 L
oosen the screw
Fig. 2-16 heatsink
being removed
3. Loosen the CPU socket (
Fig 2-17
)
4. take CPU off the board (
Fig 2-18
)
Fig. 2-17
Loosen the socket
Fig. 2-18
Take off the CPU
5. Install CPU in opposite order as above
6. Please be careful of the distance between the heatsink and the board, it must be 14±5% mm
to avoid bending the board(
Fig 2-19,Fig 2-20.Fig 2-21
)
Fig. 2-19
measure the distance between the
heatsink and the board
Fig. 2-20
the distance between the heatsink
and the board
