NAR-7060 User’s Manual
11
Storage Device
•
Two 3.5” HDD
Expansion
•
One 64bit PCI-X slot
LCD Panel
•
2X16 LCD module with six-button keypad
LED
•
LED indicators for power, HDD and Ethernet ports
Power
•
400W ATX PSU
Cooling
•
One 40CFM blower for CPU cooling
•
Four 35mm and one 40mm system fans
Operating
Environment
•
Temperature: 5 to 35
℃
•
Humidity: 5% to 95% RH
Dimension
•
428.6(W) x 631.0(D) x 44.2(H) mm
•
19.00”(W) x 24.84”(D) x 1.75”
Safety
•
CE/FCC
•
UL
2.11 Hardware Configuration Setting
This section gives the definitions and shows the positions of jumpers, headers and connectors.
All of the configuration jumpers on PPAP-3720 are in the proper position. The default settings
set by factory are marked with a star (
★
).
Jumpers
In general, jumpers on PPAP-3720 system board are used to select options for certain
features. Some of the jumpers are configurable for system enhancement. The others are
for testing purpose only and should not be altered. To select any option, cover the jumper
cap over (Short) or remove (NC) it from the jumper pins according to the following
instructions. Here NC stands for “Not Connected”. (Please refer to
Fig. 2-43
for detailed
jumper positions.)
Jumper Setting Table (JP1-JP9)
JP1
BUZZER
Default Setting
Short
ENABLE
★
N/C
DISABLE
JP2
TCO TIMER
Default Setting
Short
ENABLE
N/C
DISABLE
★
JP3
BIOS WRITE PROTECT
Default Setting
Short
WRITE ENABLE
★
