NAR-7060 User’s Manual
9
Fig. 2-26
Fix HDD to the bracket(in both sides)
Fig. 2-27
Connect power and IDE cable to HDD
3. Connect the IDE cable and power connector to HDD (
Fig. 2-27
).
4. Fasten both screws back to lock HDD onto chassis (
Fig. 2-28
).
Fig. 2-28
Install into chassis
2.9 Remove and Install PCI card
One PCI-X slot is available to NAR-7060. Follow the steps below for installation:
1. The PCI-X slot is located on the left of the board (
Fig. 2-29
).
2. The back of the PCI-X card should be against the back of NAR-7060 (
Fig. 2-30, 2-31
).
Fig. 2-29
PCI-X slot on the back of PPAP-
3720
Fig. 2-30
Push the PCI-X add-on card into the
slot
