4. Loosen the pressure lock handwheel on the telescoping height adjustment brace.
5. Remove the padlock and pin from telescoping brace while grasping the side handle on the rear vertical support;
place the through-pin into the through-pin socket of the control box (see Detail “L”).
6.
Clear floor area around the unit from spectators
.
Stand to one side
of the unit and lower unit downward using
control pendant.
7. Lower unit to storage height.
8.
Replace through pin and padlock in telescoping brace
.
9. Unplug pendant and power extension cord from control box.
10. Roll unit to storage location.
Note: Docking trays can be removed from floor when not in-use. If docking trays were removed, replace docking
trays before moving portables into position before next use.
OPERATING PROCEDURES FOR No. 1835080 and 1835108 PORTABLE BACKSTOPS
www.porterathletic.com
Copyright
2017 by Porter Athletic.
All rights reserved.
888-277-7778
7/23/2018
INST1835
Page 19 of 39
1835 Portable Basketball Backstop
Installation, Operation, and Maitenance Manual
Operating Procedures
