DETAIL "C"
3
1
DETAIL "D"
3
GOAL ASSEMBLY:
5. You are now ready to mount the goal. Carefully hold the goal (#2) against the face plate of the backboard (#1)
and insert the four (4) 3/8" x 3-1/2" lg. carriage bolts through the goal, backboard, and the backstop mounting plate
(refer back to Detail “B”). Backboard may have to be shifted slightly for proper alignment. Secure with four (4) 3/8"
flat washers, 3/8" lock washers, and 3/8" hex nuts on backside of mounting plate; snug tighten only. Place rubber
cap on back of each carriage bolt. See Detail “B”.
SWAY BRACE ASSEMBLY:
6. Attach the formed swaybrace (#3) to the slotted plates in the upper corners of the glass backboard using two (2)
3/8" x 1-1/4" long carriage bolts, 3/8" flat washers, 3/8" lock washers, and 3/8" hex nuts. Finger tighten only (see
Detail “C”).
7. Attach back of swaybrace (#3) to the horizontal extension assembly (see Detail “D”) using one (1) u-clamp, two
(2) 3/8” lock washers, and two (2) 3/8”-16 unistrut nuts. Finger tighten only.
www.porterathletic.com
Copyright
2017 by Porter Athletic.
All rights reserved.
888-277-7778
7/23/2018
INST1835
Page 8 of 39
1835 Portable Basketball Backstop
Installation, Operation, and Maitenance Manual
Assembly & Setup
