11
Cutting
Remove excess wood from door jamb, window sill and/or toe kick. Removing excess
copper or PVC pipe.
Scraping
Carpets & backing, old tile adhesives, caulking on masonry, wood and other surfaces.
Grinding
Tile grout, plaster, mortar splatters, concrete on tiles, sills.
ASSEMBLY
WARNING:
Remove battery from tool
before making any assembly, adjustments or
changing accessories. Such preventive safety
measures reduce the risk of starting the tool
accidentally.
WARNING:
Risk of lacerations or
burns.
Do not touch workpiece or blade
immediately after operating the tool. They
can become very hot. Handle carefully.
Always allow accessories and workpiece
to cool before handling.
Installing/Removing
Accessories
The PCC510 features an exclusive tool-
free accessory changing system. This
allows for faster accessory changes
without the need for wrenches or hex keys
like other oscillating tool systems.
• Grasp the tool and squeeze the
accessory clamping lever as shown in
figure 5
.
• Clean any residual debris from the tool
shaft and the accessory holder.
• Slide the accessory between the shaft
and the accessory holder making sure
the accessory engages all eight pins on
the holder and is flush with the shaft
(
figure 6
).
• Release the accessory clamp lever.
5
6
90582820 PCC510 18V OScillating Tool manual.qxd:??????-00 Cir Saw book 12/13/11 9:12 AM Page 11
