Porsche Home Energy Manager, Manual

Page: 50 / 944

48
Overview
Displays and controls
Fig. 13 Displays and controls
Displays Description
Status
On/Off
LED lights up green: Energy man-
ager is ready for operation.
Internet
status
LED lights up green: Internet con-
nection established
WiFi status
LED flashes blue: Hotspot mode, no
client connected
LED lights up blue: Hotspot mode,
at least one client connected
LED flashes green: Client mode, no
WiFi connection available
Displays Description
LED lights up green: Client mode,
WiFi connection available
LED lights up or flashes blue: Paral-
lel operation in client mode is possi-
ble.
Status of
Powerline
Communi-
cation
(PLC) net-
work
LED flashes green: Searching for
PLC network connection.
LED lights up green: PLC network
connection in place.
LED flashes blue: Enabling DHCP.
LED lights up blue: DHCP (for PLC
only) is active and PLC network
connection is in place.
Ethernet
status
LED lights up green: Network con-
nection in place.
RS485/CA
N status
On: LED lights up green during com-
munication (currently not assigned).
Fault sta-
tus
LED flashes or lights up yellow: Fault
present
LED lights up red: Functions restric-
ted
Controls Description
Press WPS
button
e To establish a WiFi connection
using the WPS function, briefly
press the WPS button (only
network connection as client
possible).
WiFi but-
ton (hot-
spot)
e
To enable WiFi, press the WiFi
button briefly.
e To disable WiFi, press and hold
the WiFi button for more than 1
second.
PLC pairing
button
e
To enable the PLC connection,
briefly press the PLC pairing
button.
e To enable the energy manager
as DHCP server (for PLC con-
nections only), press and hold
the PLC pairing button for more
than 10 seconds.
e For a PLC connection to a cli-
ent, briefly press the PLC pair-
ing button again.