Page 8
PUSH PRO -0120843
PRE-OPERATION SAFETY INSPECTION
NOTE: CAREFULLY READ, UNDERSTAND AND FOLLOW ALL SAFETY RULES, OPERATING
INSTRUCTIONS, LABELS AND NATIONAL SAFETY INSTRUCTIONS/REQUIREMENTS.
1
Open the tray and inspect for damage, uid leaks or missing parts daily.
2
Check daily the level of the hydraulic uid with the platform fully lowered. The fluid level must
be within 6 mm (1⁄4′′) of the top of the ll hole. Add recommended hydraulic uid if necessary. See
“Specifications” on pages 16 to 18.
3
Check weekly that the uid level in the batteries is correct. See “Battery Maintenance” on page 15.
4
Verify that the batteries are charged daily.
5
Check daily that the AC extension cord has been disconnected from the outlet on the side of the
chassis.
6
Inspect the brakes daily on the rear castor wheels for proper operation. Step down on the brake
levers and verify that the machine will not move.
7
Check daily that all guardrails are in place and all fasteners are properly tightened.
8
Inspect the machine thoroughly each day for cracked welds and structural damage, loose or
missing hardware, hydraulic leaks, damaged control cable and loose wire connections.
