22
Set the system clock to local time, as follows:
Step 1:
Press
to set the time, the hours are blinking.
Step 2:
Adjust the hours with the buttons
and
.
Step 3:
Press
to switch to minutes.
Step 4:
Adjust the minutes with the buttons
and
.
Step 5:
Press
to validate and return to the main screen.
4. Use
This function is for programming the Start/Stop timing. Setting is as follows:
Long press
and
to force the de-icing function. The indicator
is blinking.
Long press
and
to enable or disable the LED function.
Long press
and
to lock or unlock the control panel. The indicator
appear or dissapear
Long press
and
to activate the WiFi detection. The indicator
is blinking.
Step 1:
Long press
3s to enter into timer functions.
Step 2:
If blinking, press
to active the Start timer.
Step 3:
Adjust the hours with the buttons
and
.
Step 4:
Press
to switch to minutes.
Step 5:
Adjust the minutes with the buttons
and
.
Step 6:
Press
to programme the stop time.
Step 7:
If blinking, press
to active the Stop timer.
Step 8:
Adjust the hours with the buttons
and
.
Step 9:
Press
to switch to minutes.
Step 10:
Adjust the minutes with the buttons
and
.
Step 11:
Press
to return to the main screen.
NB:
The remote control
returns automatically to
the main screen after 30
seconds.
4.6 Setting the clock
4.7 Programming Start/Stop
4.8 Force de-icing function
4.9 LED function
4.10 Lock/Unlock the control panel
4.11 Enable WiFi
Your Poolex heat pump can be remotely controlled using the built-in WiFi device,
for more information and for instructions on how to use it please visit our website.
https://www.poolex.fr/wifi
