PoolScape ENDEAVOUR PREMIUM, Owner'S Manual

Page: 9 / 20

8
FIXING THE POOL WALL
Put the pool wall on a ground cloth, cardboard or a piece of ply wood (see diagram 10) . This is to
protect the levelled ground while installation of pool wall is taking place. Make sure the square
window (for skimmer) is on the upward side.
( It is advisable to wear protective gloves when handling the metal wall).
You should decide where the skimmer and filtration system should be placed. The opening end of
the pool wall closest to the square window should be placed on the closest metal piece to your selected
location for the electic supply of the filtration system. The pool wall end should be resting in the centre of the
base metal piece (See diagram 11) . Make sure that this location is not in a windward position. Square window
should be in the upward position.
Then uncoil the whole pool wall onto the ground rail. Join the 2 ends of the pool wall together. Line
up the screw holes. If you could not line up the holes, then adjust the gap distance of the small
connectors again or cut away the excessive part of the bottom rail.
(See diagram 12, 13)
(Diagram 10)
(Diagram 11)
(Diagram 12) (Diagram 13) (Diagram 14)