7
ASSEMBLING THE POOL BASE RAILS
Place the base metal pieces equally around the circle line drawn in Step 3, slide the bottom rail
into the metal piece. The base metal piece should now be placed in the middle of the bottom rail.
Do the same for all 12 bottom rails.
(See diagram 7)
Connect all the bottom rails together with a small connector piece. It is important to leave about
an 1cm gap between 2 ends of the bottom rail at the small connector piece.
(See diagram 8)
.
This is for fine adjustment of the diameter of the bottom rails. When all the rails are connected, it
should form a perfect circle and the diameter should be equivalent to the diameter of the pool
itself. You can shorten or lengthen the gap distance at the small connector piece in order to form
a perfect circle.
(See diagram 9)
(Diagram 7)
(Diagram 8)
(Diagram 9)
Summary of Contents for ENDEAVOUR PREMIUM
Page 20: ......
