49
EGW06-PCPEG-20140813
TM
TM
Section V: Operation
Humidity Control
This menu contains parameters that configure the humidity control routines of the dehumidifier. Water Temp Ctrl
This menu contains parameters that configure the compressor based water heating system of the dehumidifier.
•
Water Heat First: This parameter indicates whether the control routine will use the compressor for water heating when
there is no dehumidification requirement.
•
Deadband: This parameter is the deadband used by the compressor based pool water heating control routine.
BAS INTERFACE
This menu contains parameters that configure the building automation system interface of the dehumidifier.
MULTI-UNIT NETWORK
This menu contains parameters that configure the operation of dehumidifier in a multiple unit installation.
COMPRESSOR
This menu contains parameters that configure the operation of the dehumidifier compressor.
ECONOMIZER
This menu contains parameters that configure the operation of the optional field provided and field installed economizer
damper system.
HISTORY
The history screen provides information on the last 50 faults that have occurred in the dehumidifier. It can be used for
troubleshooting by an experienced HVAC technician. The faults are recorded with a sequence number from 1 to 50.
Sequence number 1 is always the most recent fault. The following information is stored and displayed for each fault in
non-volatile memory:
• Hour at which the fault occurred.
•
Fault Code Number
•
Return Air Temperature
•
Return Air Humidity
• Discharge Pressure
• Suction Pressure
• Suction Temperature
• Pool Water Temperature
• AC Solenoid Status
•
Bypass Solenoid Status
• Compressor Status
•
Reheat Solenoid Status
MANUAL MODE
The Manual Mode menu for use by qualified service personnel provides two options, Demand Control and Digital
Output Control.
UTILITIES
The Utilities menu provides sub menus for configuring units of measure and passwords for set point and service access
control.
