Playing the Radio
The audio system can be operated using the knobs and
hard keys located on both sides of the navigation screen.
PWR (Power): Press this knob to turn the audio and
navigation systems on and off.
VOL (Volume): Turn the knob to increase
or to decrease volume.
SCV (Speed Compensated Volume): Use the Audio
menu to access this function . Your audio system adjusts
automatically to make up for road and wind noise as you
drive. Set the volume at the desired level. Then, as you
drive, this function automatically increases the volume, as
necessary, to overcome noise at any speed. The volume
level should always sound the same to you as you drive.
BAND: Press this hard key to access the BAND screen
and to switch between AM, FM1 and FM2. Each
radio band has six station presets accessible.
Finding a Station
TUNE: Use the control pad in the lower left corner of
the navigation system to select radio stations manually.
y
SEEK
z
: Press the up or the down arrow to go
to the next or the previous station and stay there.
To scan stations, press and hold the SEEK up or down
arrow for two seconds until you hear a beep. The
radio will go to a station, play for a few seconds, then
go on to the next station. Press either SEEK arrow again
to stop scanning.
To scan preset stations, press and hold the SEEK up or
down arrow for more than four seconds. You will hear
two beeps and PSCAN will be displayed, along with the
number preset. The radio will go to the first preset
station stored on your pushbuttons, play for a few
seconds, then go on to the next preset station. Press
either SEEK arrow again to stop scanning presets.
The radio will seek and scan only to stations that are in
the selected band and only to those with a strong signal.
3-3
