PF3000 Power Filter Characteristic Tester User Manual
4.3. Toolbar Introduction
The toolbar of PF3000 is showing in the figure 4-8.
Figure 4-8 PF3000 toolbar
Run: Press
, the kit outputs signals and starts to work. (Note: for the resistance-frequency
and phase-frequency characteristics test, users can measure each point according to the set
sub-frequency and each step by pressing
.)
Scan: quick test and display the resistance-frequency and phase-frequency characteristics
within 5s by pressing
to calculate the frequency and impedance value of harmonic
vibration point. The method is mainly used to evaluate the harmonic vibration point of filter
with unknown parameters. For the filter with knowing the parameters, users can check the
wiring connection according to resistance-frequency and phase-frequency characteristics.
“Save”: Press
to save the test parameters of “Z/F test” (hft format)
“Open”: Press
to open the test parameters (in hft format)
“Wave”: Press
to display the actual voltage and current waveform, display the phase,
frequency and RMS information. Each voltage/current amplitude and time interval can be set
here.
19
