PONNDORF Gerätetechnik GmbH
Leipziger Strasse 374
D - 34123 Kassel
Operation Manual
Hose Pump Series
P_delta / PD-S
Page 21 of 29
Version 003_GB / 04.2021
6.4.7
First end of the hose is
fixed.
6.4.8
Proceed similar with the
other end of the hose.
6.4.9
Close the pump by
moving the handle back
.
6.4.10
Open the lock of the
connectors shortly
…
6.4.11
… and close again.
The hose is optimally fixed
in the pump.
Pump is now ready for operation!
Before starting the pump it must be secured that any valves assembled in
the pipework (on suction and discharge side) are opened.
Otherwise the pump or parts of the pipework could be damaged by too
high increase of pressure.
The casing cover may only be removed when the drive is switched off and
the power supply is interrupted (remove fuses).
If the pump is equipped with a hose leakage monitor it must be ensured
that the sensor is not soiled and, in particular, that the pump hose is not
lubricated too much, as soiling and deposits on the sensor can impair its
functionality.
CAUTION
CAUTION
Summary of Contents for P delta 15
Page 1: ...Hose Pump Series P_delta PD S Operation Manual...
Page 2: ......
