17
10.1 Notes on safety requirements for antenna systems
Your antenna system must comply with DIN EN 60728-11 (VDE 0855-1).
Figure 6
Wiring of the antenna system
Please note:
Due to the risk of fires caused by lightning strikes, all metal parts must be mounted on a non-combustible base.
Combustible materials include wooden beams and boards, plastic boards etc.
Grounding the Headend Station
Ground the headend station by connecting the ground terminal on the back to the equipotential bonding bar as
shown in Figure 6.
Grounding Coaxial Cables
Remove the insulation of the coaxial cable near the terminal. Clamp the stripped cable into the grounding bar as
shown in Figure 6.
Fitting F-Connectors
Screw the F-connector onto the stripped coaxial cable (e.g. POKA 110 HD A+). Take care that the shielding (Figure
7/2) and the inner core (Figure 7/1) must not come into contact.
Figure 7
Assembling coaxial cables
2
1
90
Grounding bar ES-06
Reflector Aerial
