22
13 Function Telecontrol
13.1 Description
After the assembly of the base unit and set-up of the input distribution in accordance with the instructions of the
basic device, the option "Telecontrol" allows to remotely control modules via a LAN connection.
The device can be programmed via the Internet by connection to a router (e.g. a DSL router).
13.2 Settings on the base unit
To prepare the base unit for remote control mode, the settings of the base unit SPM 2000 LAN shown on page 24
have to be done.
13.3 CAT 5 network cable
A CAT 5 network cable is supplied with the unit. The device can be connected directly to a router by using this cable.
14 Installing the software
How to install the software on the PC/notebook (WIN XP or Vista required, min.):
1. Unpack WinZip-file
SPM_telecontrol_PC_Vxxx.zip
and run setup.exe.
2. Close open programs and click “OK”.
3. Select required directory and then click on the square with the PC icon.
4. Confirm program group with “Weiter”.
5. Confirm successful setup with “OK”.
15 Programming the parameters
15.1 Create the headend
1. Start the software >
SPM_telecontrol<
.
2. First of all, the required headend must be created by using the “Edit/Select” button and choosing “Edit Headends“.
3. Click on the “Add New” button.
. Enter the name, place, IP address (or if applicable alias: www.___) and port of the headend (an existing headend
can be modified by ”Modify” or deleted by “Delete”).
5. Finally click the "Save" button -> forwarding to the program menu “Select”, automatically.
