25
Note:
The password protection is not activated at the factory and can be switched on from
μC-SW version
1.31.
After pressing the button
Password Settings
, the following input menu will be opened.
The activation of password function is done by ticking
Use Password
.
Enter the password (min.6 / max.10 digits) in the input field
Password
(consisting of letters, numbers or special
characters in any sequence) and retype the password in the input field
Retype Password
.
Click on
Save
to store the password settings.
By clicking on
Change Password,
a new password will be created.
You can also deactivate the password protection by removing the checkmark in front of
Use Password
.
For
this, you need the password to log in first.
Exit the program
–
SATC12
– or continue with the settings if necessary.
The next time that the program
–
SATC12
– is started, please enter the password in the input field and then
click
OK
to confirm the password or
Cancel
, if required.
Please note:
In this pop up window no change of the password is possible.
