11
8.2 Programming of the device parameters
Start the program
–
SATC12
–
Click on
Menu
at the top left
The following menus are available:
Program Menu
Diagnostic
Firmware Update
Exit
Select
Program Menu
: All adjustments of the input and output parameters are carried out here. After calling
up the menu, the current parameters of all 12 channels will be displayed.
For a better overview, the menu is split into channels 1-6 and 7-12 across two pages.
Via this menu, all settings of the input and output parameters can be done. The upper part of the menu
shows the device data such as type, serial number, hardware version and software versions for CPU (µC)
and FPGA. The right-hand side of the menu contains the navigation buttons
CHANNEL 1 - 6
and
CHANNEL 7 - 12
, which are used to call the transponder/output specific data of the respective channel
strip.
