3-5
3 First Steps
Bottom view
The bottom view of the sensor head (image section) is shown in the following
figure.
Figure 3.3:
Bottom view of the sensor head (image section)
1
VIDEO
USB interface
Connection for the USB 3.0 cable to the industrial PC to control the video camera
and transmit the video signals.
2
Transport lock
To secure the linear stage to protect the sensor head during transport.
3
MOTOR
connection (17-pin circular connection)
Connection for the motor cable from the controller for the power supply and the
signal transmission of the linear stage motor.
4
CONTROL
connection (25-pin Sub-D jack)
Connection for the control cable from the controller for the power supply and the
signal transmission of the linear stage motor.
