B-4
B Optional Accessories for the Sensor Head OFV-511/-512
B.3 Fiber Heads
The following fiber heads are available for the sensor head OFV-511/-512:
•
OFV-101
•
OFV-102 standard fiber head
•
OFV-130-3 for beam diameter 3
µ
m
•
OFV-130-5 for beam diameter 5
µ
m
•
OFV-200 high accuracy fiber head
Assembly
OFV-101
OFV-102
OFV-130-3
OFV-130-5
To mount the fiber head onto the fiber, proceed as follows:
1. Unscrew the mini sensor from the fiber and keep in a safe place because
each mini sensor is exactly adjusted to its fiber.
2. Screw the fiber head onto the end of the fiber until it is securely fixed.
The fiber head can now be used.
Assembly
OFV-200
The fiber head OFV-200 is equipped with a Nikon bayonet mount which can
take a Nikon camera lens. To mount this head onto the fiber it has to be
partially opened and then you proceed as follows:
1. Undo two of the four Allen screws on the back panel of the OFV-200 and
remove one half of the back panel.
2. Undo the four Allen screws on the front panel of the head and take off the
front panel.
3. Thread the fibers through the opened back panel and through the fiber
head itself and screw the end of the fiber into the front panel until it sits
tightly.
4. Re-assemble the head by starting with the front panel. Make sure while
doing so that you orient the bayonet mounting plate so that you can read
the inscription on the front lens from above.
The fiber head can now be used.
Summary of Contents for OFV-3001
Page 28: ...3 16 3 First Steps...
Page 54: ...5 12 5 Operating the Vibrometer...
Page 94: ...D 10 D Functional Description of the Controller...
